Step Two: Buffing

Choose One Model:

1. 57126 Dynabuffer
2. 55126 Dynabuffer
3. 58455 Dynabuffer

• Apply small amount of polishing compound to optional buffing pad attached to Dynabuffer. Spread compound evenly to precondition pad. 
• Apply small drop of polishing compound to work surface. Use pad to spread compound evenly over sanded area of surface.
• Place pad on sanded area and apply pressure (approximately 3 lbs./1.4 kg of pressure).
• Throttle tool ON, and adjust pressure to minimize vibration (finding the "sweet spot").
• Move pad in random motion, keeping pad flat or tipped slightly forward.
• Throttle tool OFF with pad still on surface ("start ON and stop ON").
• Wipe surface dry with clean, soft cloth.
• If imperfections are still visible, repeat Two-Step System.