3M™ Dynamic Mixing System Nozzle for Fillers & Glazes, 05847, 50 nozzles per carton, 6 cartons per case
SKU: 7000119826
3M™ Dynamic Mixing System Nozzle for Fillers & Glazes, 05847, 50 nozzles per carton, 6 cartons per case
SKU: 7000119826
$145.35
/ Carton
Add $199.00 worth of items to your cart to qualify for
Minimum Order Quantity: 6 Carton
QTY:
SHIPPING DIMENSIONS
Height: 7.38 Inches
Width: 9.88 Inches
Length: 13.75 Inches
Weight: 5 Lb(s) 15 Oz
Product Benefits
- Active mixing action thoroughly blends materials for precision mixing every time
- Reduces mess and cleanup – no hand mixing is needed for fillers and glazes
- Short length limits material left inside the nozzle
- Nozzles colored by product line help ensure trouble-free application for adhesives, sealants, fillers and glazes
- Easy clip-on/off application to cartridges saves time
- Nozzle extensions are available to reduce bead size when extruding adhesive and sealants
More Product Details
No air is allowed to enter when the filler or glaze and hardener are mixed
As an integral part of our Dynamic Mixing System, our 3M™ Dynamic Mixing System Nozzle has been designed specifically for dispensing accurately mixed two-part DMS 1.0 and DMS 1.5 products, including epoxies, fillers, glazes, adhesives and sealers in collision repair. These mixing nozzles completely blend materials according to specified mixing ratios, and clip onto cartridges easily. They remove just as easily for maximum efficiency.
3M designed the Dynamic Mixing System Nozzle to make the application of any DMS product more efficient. Choose a red-colored nozzle (05847) for DMS 1.0 products (fillers and glazes). For DMS 1.5 adhesives and sealers choose nozzles with the purple color (55847). Nozzle extensions are available for extruding DMS 1.5 products into hard to reach places.
Innovative mixing nozzle prevents over-catalyzation by blending a perfect ratio
With our Dynamic Mixing System dispenser and mixing nozzles, there is no need to worry about adding too much or too little hardener to filler and glazes. Dispense products when and where you want them, at the touch of a trigger. There is no messy mixing process, reduced wasted materials, and reduced time for cleaning up. By utilizing the correct amount of product and reducing consumption, you can save both materials and time.
3M™ Dynamic Mixing System: As Easy as Twist, Mix and Fix
Here is how it works: Twist a cartridge into place on the applicator until it locks into place. For fillers and glazes, attach a red mixing nozzle and mix the two-part component product automatically by simply pulling the trigger on the applicator.
For adhesives and sealers, attach a purple mixing nozzle after equalizing the cartridge. Watch as it mixes and dispenses an accurate ratio of product. Fix, bond or seal instantly by applying the product directly from the applicator to the surface and spread into place.
Learn More about the 3M™ Auto Body Repair Dynamic Mixing System (PDF, 3.3 Mb)