Buy In BulkScotch-Brite™ Metal Finishing Wheel, 12 in x 4 in x 5 in, 5A MED, 1 per case
SKU: 7010365609
Scotch-Brite™ Metal Finishing Wheel, 12 in x 4 in x 5 in, 5A MED, 1 per case
SKU: 7010365609
$713.26
/ Each
Adding this item to your cart will qualify your order for 
Sold By: Each
QTY:
SHIPPING DIMENSIONS
Height: 5.00 Inches
Width: 12.50 Inches
Length: 12.60 Inches
Weight: 6 Lb(s) 12 Oz
Product Benefits
- High conformability and uniform wear provides consistent cutting power to produce superior satin, mill and brushed finishes
- Open-web construction resists loading and runs cool to provide professional results on stainless steel, brass, aluminum and other metals
- Controlled abrasive action helps prevent undercutting or gouging
- Highly conformable wheel effectively finishes irregular or contoured surfaces
- Convolute construction wound around a fiber core runs smooth to provide fine, uniform finishing
Blend out minor surface imperfections
On softer metals like aluminum, copper, and brass, Scotch-Brite™ Metal Finishing Wheels (PDF, 13 Mb) are used to blend out minor surface imperfections and handling marks while providing the desired decorative finish on products such as builder's hardware, and plumbing fixtures. Typically used on stationary machinery, the wheels are available in diameters of 6 to 16 inches and widths of 1/2 inch and greater. This highly conformable wheel is convolutely wound on a core to run smoothly and help create professional finishing results. Available in grade CRS and MED.
Scotch-Brite™ offers many different Surface Conditioning Wheels
Scotch-Brite™ Metal Finishing Wheel uses aluminum oxide abrasive. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking (PDF, 22 Mb) and metalworking, including ferrous alloys.
The Many Benefits of Scotch-Brite™ Abrasives
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Learn more about Scotch-Brite™
RELATED PRODUCTS
3M™ Hookit™ Soft Interface Pad, 05777, 6 x 1/2 x 3/4 inch, 10 pads per case
SKU: 7000028239
$20.06
6" (152 mm) Dia. x 2" (51 mm) W x 1" (25 mm) CH 40 Grit A/O DynaCut Flap Wheel
SKU: 78384
Add to Cart to See Price
