Scotch-Brite™ SST Deburring Wheel, 12 in x 3 in x 5 in, 8S FIN, 1 per case
SKU: 7010294727
Scotch-Brite™ SST Deburring Wheel, 12 in x 3 in x 5 in, 8S FIN, 1 per case
SKU: 7010294727
$518.22
/ Each
Adding this item to your cart will qualify your order for
Sold By: Each
QTY:
SHIPPING DIMENSIONS
Height: 3.90 Inches
Width: 13.00 Inches
Length: 13.10 Inches
Weight: 6 Lb(s) 13 Oz
Product Benefits
- Non-woven web construction resists loading and delivers fresh abrasive to the surface continuously
- Deburrs and finishes demanding alloys
- Higher density wheel that retains conformability for finishing intricate geometries and contours
Our Scotch-Brite™ SST Deburring Wheel is strong enough to easily remove burrs and radius edges resulting from drilling, stamping, punching and other machining operations, while not disturbing critical tolerances. It is used extensively in the aerospace industry for deburring and finishing turbine blades and vanes, polishing and blending surgical instruments, and deburring aluminum die cast flashing, among other uses.
Typically used on stationary machinery, these wheels are available in diameters 4 inches and greater and widths up to 36 inches. SST wheels use fine grade silicon carbide or aluminum oxide abrasives. Silicon carbide is sharp, hard synthetic abrasive, a good match for cutting hard materials. Aluminum oxide is a hard, blocky mineral with a high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ convolute wheels are formed by wrapping layers of abrasive material around a central core. The three-dimensional web construction creates consistent finishes and can be used to radius edges.
Scotch-Brite™ wheels, one of the most complete selections of surface conditioning wheels, continue to raise the bar for performance even after five decades.