Medium to high density construction with medium or fine grade aluminum oxide makes this abrasive a good match for mid-sequence applications such as cleaning of hard metals or general deburring
Harder material and increased edge durability over 600 Series Unitized Wheels provides a longer-lasting and more aggressive wheel for heavier-duty tasks
Aluminum oxide mineral is a good match for ferrous and non-ferrous metals, including aluminum
Open web is load resistant, contributing to longer abrasive service life
Easy fastening and swapping of quick change disc enhances tool efficiency and worker productivity
Medium to High Density Wheel Provides Aggressive Burr Removal and Cleans to a Fine Finish As a double-duty abrasive with combined durability and fine cutting action, the Aluminum Oxide (A/O) 700 Series Unitized Wheel is great for an extensive list of applications that require an aggressive cut and fine finish. Use a Standard Abrasives™ A/O 700 Series Quick Change Unitized Wheel for deburring gears and the trailing and leading edge on turbine blades, as wells as removing punched hole burrs on stainless steel, flashing and medium-sized pits and scratches. It can also be used for edge radiusing, particularly on harder metals.
When it comes to cleaning, trust the Standard Abrasives™ 700 Series Wheel for removing heavy scale, light oxidation from aluminum, brazing on steel tubing, weld discoloration, and handling marks prior to coating or plating.
Quick Change Wheels Increase Throughput Standard Abrasives™ Quick Change Unitized Wheels are available in smaller sizes. Quick change wheels allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications. Easy fastening and swapping of wheels enhances tool efficiency and worker productivity.
Choose the wheel compatible with your TR or TS holder pad. TR wheels have a nylon threaded male hub that easily threads onto TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS system has a metal hub that fastens to its holder pad with a simple twist.
All Standard Abrasives™ TS and TR holder pads have a 1/4-20 female thread. A 1/4" TA4 mandrel attaches the holder pad to the tool (sold separately, part number 540013).
Get high performance and durability in a variety of cleaning, deburring, finishing and polishing applications.
Non-Woven Unitized Construction Offers a Step Up in Density and Durability for Stubborn Surfaces Standard Abrasives™ Unitized Wheels are a great match for tough deburring, cleaning, blending and finishing applications. They come in a broad range of densities and grades to suit different metals, the degree of aggressiveness required, shape of the part, and desired finish. Although used for some of the same tasks as Standard Abrasives™ Buff and Blend products, they are designed with a far stronger and denser construction to support more aggressive applications and accomplish material removal more rapidly. Even though unitized wheels are much stiffer products, the non-woven nylon fibers of the wheel maintain the advantage of responding to surface irregularities while preserving the geometry of the piece, and produce a consistent finish.
Unitized wheels are created by starting with layers of open web material that combines non-woven fiber strands and abrasive mineral with a tough resin bond. These layers of web are then cured and compressed together. By fusing layers of open web, the abrasive gains more toughness and durability, so it can withstand repeated wear.
Ultimately, the wheel's durability is what makes it such a good match for edges. Regardless of the diameter or thickness of the wheel, it maintains its structural integrity to remain a stiff and long-lasting abrasive even under high pressure. Additionally, as the layers wear, the wheel can be dressed to maintain its
RELATED PRODUCTS
1/8" (3 mm) W x 18" (457 mm) L 80 Grit A/O DynaCut Belt