Standard Abrasives™ Buff and Blend AP Disc 873310, 3 in x 1/4 in, A MED, 25 per inner, 250 per case

SKU: 7010368522

Standard Abrasives™ Buff and Blend AP Disc 873310, 3 in x 1/4 in, A MED, 25 per inner, 250 per case

SKU: 7010368522

$3.45 / Each

Add $199.00 worth of items to your cart to qualify for free shipping

Minimum Order Quantity: 250 Each

Estimated Lead Time (subject to change): 11 Days

QTY:

SHIPPING DIMENSIONS Height: 7.94 Inches Width: 9.75 Inches Length: 23.69 Inches Weight: 5 Lb(s) 13 Oz

Product Benefits

Open web is flexible and pliable, so it will not gouge the substrate and sustain part geometry
Aluminum oxide mineral is friable and sharp, revealing fresh, sharp cutting edges for a consistent scratch
May be run with a lubricant to help eliminate swarf and potential for smearing the substrate
Available in very fine (VFN, red) and medium (MED, tan) grades to accommodate project needs
Open web is load resistant, so abrasive will not get clogged with debris, contributing to longer service life

Recommended Applications
Standard Abrasives™ Buff and Blend AP Disc strikes a balance between toughness and pliability. AP material is the thinnest Buff and Blend material, which enhances the disc's flexibility and ability to conform to the substrate. Yet, the high density of AP material creates an aggressive disc that is more tear resistant than Buff and Blend GP. Use this disc for medium-duty cleaning applications on parts with close tolerances; remove unwanted layers of paint, corrosion, sealants, adhesive and coatings.

			6" x ¼"	6" x ½"	8" x ½"	8" x ¾"	8" x 1 ¼"	12" x 1 ¼"
Grade	Grain	Color	Part No.	Part No.	Part No.	Part No.	Part No.	Part No.
Medium Very Fine	A/O A/O	Tan Red	873710 853708	870710 —	870910 —	876910 —	— 859908	879130 —
Max. R.P.M.			3,600	3,600	2,700	2,700	2,700	1,800
Min. Pkg.			10	10	10	—	10	5
Case Qty.			100	100	100	10	100	50

This disc is made with aluminum oxide mineral, which cuts sharp but is still friable — fragmenting under heat and pressure to reveal sharp cutting edges. The abrasive is available in medium (MED, tan) and very fine (VFN, red) grades, so you can select the best grade for your application. Typically, very fine grades deliver a soft scratch pattern and a medium grade delivers an aggressive scratch pattern. <br