Standard Abrasives™ Buff and Blend HS Disc 813410, 4 in x 1/4 in, A MED, 10 per case
SKU: 7010368534
Standard Abrasives™ Buff and Blend HS Disc 813410, 4 in x 1/4 in, A MED, 10 per case
SKU: 7010368534
$4.14
/ Each
Add $199.00 worth of items to your cart to qualify for
Minimum Order Quantity: 100 Each
Estimated Lead Time (subject to change): 11 Days
QTY:
SHIPPING DIMENSIONS
Height: 10.38 Inches
Width: 10.38 Inches
Length: 10.75 Inches
Weight: 4 Lb(s) 15 Oz
Technical Specifications
Three grades to choose from for varying degrees of aggressiveness and finish | Coarse (CRS - green), Medium (MED - blue), and Very Fine (VFN - maroon) |
- High strength (HS) Buff and Blend material delivers the best results for light deburring and final finishing
- Dense, stiff construction withstands high pressure without folding over, improving productivity
- Produces a uniform, consistent, smear-free finish on ferrous and non-ferrous metals
- Aluminum Oxide mineral cuts sharp, helps produce a consistent scratch pattern, and works well on many different metals
- Flexible, pliable open web removes burrs and surface contaminants without gouging the substrate
- Open web is load resistant, limiting buildup of debris that can clog the abrasive and prolonging service life
- Center hole discs come in a range of medium to large sizes to meet many different project specifications
High Strength is the best material for light deburring and finishing applications
- Produces a uniform, coarse finish similar to Surface Conditioning material
- Capable of withstanding high contact pressure without folding over when run as a plain disc
- Easily finishes contoured parts
- Durable enough to finish edges and welds
- Satin and grain finishing of metal surfaces
- Blending and cleaning surface imperfections
- Blending out tool marks
- Markets include stainless steel fabricators, plumbing fixtures, metal fabricators, door hardware, food equipment Manufacturers, builder's hardware, aluminum extruded products, and aerospace
- Green
- Rigid, durable construction accomplishes edge breaking, deburring and finishing finish edges and welds
- Satin and grain finishing of metal surfaces
- Cleaning surface contamination
- Deburring and edge breaking
- Capable of withstanding high contact pressure without folding over when run as a plain disc
- Easily finishes contoured parts
- Produces a clean finish, without irregular scratches and "sparkles"
- Markets include stainless steel fabricators, plumbing fixtures, door hardware, food equipment manufacturers, aluminum extruded products, aircraft engine manufacturers, orthopedic implants
- Blue
- Excels at light deburring and final finishing of small, irregular shaped parts
- Light edge breaking on machined or stamped parts
- Edge radiusing
- Deburring threaded parts
- Pre-finish of precious metals prior to polishing <li