Standard Abrasives™ Buff and Blend Combi-Wheel 898011, 3 in x 2 in x 1/4 in, A VFN 180 grit, 5 per inner, 50 per case

SKU: 7000122226

Standard Abrasives™ Buff and Blend Combi-Wheel 898011, 3 in x 2 in x 1/4 in, A VFN 180 grit, 5 per inner, 50 per case

SKU: 7000122226

$29.76 / Each

Add $199.00 worth of items to your cart to qualify for free shipping

Minimum Order Quantity: 5 Each

QTY:

SHIPPING DIMENSIONS Height: 8.88 Inches Width: 9.63 Inches Length: 23.75 Inches Weight: 17 Lb(s) 3 Oz

Product Benefits

Useful for satin finishing on large contoured surfaces
Resin coated non-woven mesh material runs cool and resists smearing
1/4 (6mm) permanently affixed shank enables easy use on a small straight grinder or flat finisher (for larger wheels)
Steel shank helps maintain smooth running and ease of control for off-hand operations
Addition of coated flaps produces a sharper cut than a completely non-woven brush
Blends, cleans, and finishes on ferrous and non-ferrous materials when a linear scratch pattern is required

Versatile Utility and Linear Scratch Pattern
The Standard Abrasives™ Buff and Blend Combi-Wheel is a versatile product that is a great follow-up to coated abrasive steps in operations where a linear scratch pattern is desired. Use it to remove heavy oxidation prior to painting or plating, finish stamped or extruded aluminum parts, add a grain finish to stainless steel sheets, or create a satin finish on other large surfaces. It is suitable for ferrous and non-ferrous metals.

Added Strength for Demanding Finishing Applications
The durable construction of Combi-Wheel flaps provides aggressive, controlled action and a consistent, uniform finish. The Buff and Blend flaps are made from tough, resin-reinforced nylon fiber with aluminum oxide abrasive grain. The Combi-Wheel is more aggressive than a flap brush, which does not incorporate coated abrasive flaps, and less aggressive than a flap wheel, which is entirely constructed from coated abrasive flaps. In applications where a flap brush needs some extra teeth for blending or cleaning, the addition of coated abrasive flaps in a Combi-Wheel provides added abrasive strength.

Choose from a versatile range of Buff and Blend products

To suit a variety of large and small finishing operations, 3M offers this popular product in a broad range of sizes and in two grades, medium (MED) and very fine (VFN).

Load-Resistant Construction Boosts Life and Performance
Standard Abrasives™ Buff and Blend material is load-resistant to keep you cutting with fresh mineral. The gaps in the open web allow unwanted swarf to escape. Consequently, less debris clogs the abrasive, so the mineral can stay fresh, keep cutting sharp and deliver a consistent cut over the life of the product. As the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral smearing the surface, contributing to cleaner surfaces and less re-work. Furthermore, manual fatigue that may result from applying heavy pressure to a dull abrasive is reduced.

The Many Benefits of Standard Abrasives™ Buff and Blend
Standard Abrasives™ Buff and Blend products invigorate deburring, cleaning, blending and finishing applications by helping operators reduce finishing steps, minimize costs and achieve greater throughput. Each Buff and Blend product and grade offers unique benefits, so operators can choose from a versatile range of options to ensure optimal performance on specific applications.