High strength (HS) Buff and Blend material delivers the best results for light deburring and final finishing
Dense, stiff construction withstands high pressure without folding over, improving productivi
Produces a uniform, consistent, smear-free finish on ferrous and non-ferrous metals
Aluminum Oxide mineral cuts sharp, helps produce a consistent scratch pattern, and works well on many different metals
Flexible, pliable open web removes burrs and surface contaminants without gouging the substrat
Open web is load resistant, limiting buildup of debris that can clog the abrasive and prolonging service life
Easy fastening and swapping of quick change discs enhances tool efficiency and worker productivity
Three grades to choose from for varying degrees of aggressiveness and finish: Coarse (CRS - green), Medium (MED - blue), and Very Fine (VFN - maroon)
Three Grades Well-Suited for Deburring and Finishing Irregular-Shaped Parts Among the four Standard Abrasives™ Buff and Blend materials, HS material is the most stiff, durable and aggressive. Given its strength and durability, the Standard Abrasives™ Quick Change Buff and Blend HS Disc is a good match for irregular-shaped parts, such as pipe threads, the edges of molded glass containers, and non-ferrous die cast molded parts. It removes small, stubborn burrs and cuts sharp to produce a consistent finish. Non-woven construction makes the material responsive to contours and extrusions, so it is unlikely to gouge or mar the substrate while achieving an aggressive cut.
Aluminum oxide abrasive grain bonded to the nylon strands produces a uniform scratch pattern - perfect for satin or grain finishing. Use a Standard Abrasives™ Quick Change Buff and Blend HS Disc for final finishing on brass, steel, bronze, pewter, and stainless steel, as well as plated plastics.
When a very fine high luster and decorative finish is desirable on pieces such as builders hardware, choose the HS Disc in MED or VFN grade. For applications that may require a faster cut or coarser finish, choose the CRS grade disc. The coarser scratch pattern of the CRS disc also makes it ideal for satin and grain finishing applications, as well as blending and cleaning surface imperfections.
Ideal for satin and grain finishing applications
A rigid construction for edge breaking, deburring and satin finishing applications
HS Coarse Features and Applications
Produces a uniform, coarse finish similar to Surface Conditioning material.
Capable of withstanding high contact pressure without folding over when run as a plain disc.
Easily finishes contoured parts.
Durable enough to finish edges and welds.
Satin and grain finishing of metal surfaces
Blending and cleaning surface imperfections
Blending out tool marks
Markets include stainless steel fabricators, plumbing fixtures, metal fabricators, door hardware, food equipment Manufacturers, builder's hardware, aluminum extruded products, and aerospace
Green
HS Medium Features and Applications
Rigid, durable construction accomplishes edge breaking, deburring and finishing finish edges and welds.
Satin and grain finishing of metal surfaces
Cleaning surface contamination
Deburring and edge breaking
Capable of withstanding high contact pressure without folding over when run as a plain disc.
Easily finishes contoured parts
Produces a clean finish, without irregular scratches and "sparkles"
Markets include stainless steel fabricators, plumbing fixtures, door hardware, food equipment manufacturers, aluminum extruded products, aircraft engine manufacturers, orthopedic implants
Blue
HS Very Fine Features and Applications
Excels at light deb
RELATED PRODUCTS
2" (51 mm) W x 72" (183 cm) L Medium NWN DynaBrite Belt
Buy In Bulk
